Book before the season peaksService ACs, coolers and geysers before summer/winter — slots fill fast and prices rise.
Keep your service reportEvery ACFixMart job comes with a record so you can track history and warranty.
Use verified technicians onlyOur technicians are ID-checked and rated; avoid unverified door-to-door repairers.
Protect appliances from voltage spikesA stabiliser or surge protector costs far less than a burnt board or compressor.
Service your AC every 6 monthsAir ConditionerDirty filters and coils raise power bills and shorten compressor life. A wet service before summer keeps cooling strong.
Use a voltage stabiliserAir ConditionerVoltage fluctuation is the #1 cause of compressor and PCB failures in refrigerators and ACs.
Set AC to 24–26°CAir ConditionerEvery degree lower adds roughly 6% to your electricity use.
Clean filters monthlyAir ConditionerRinse the indoor unit filters with water every month during heavy use.
Don’t ignore strange noises or leaksAir ConditionerBook early — small problems like a gas leak or clogged drain become costly if delayed.
Insist on a service reportAir ConditionerEvery ACFixMart job comes with a record so you can track history and warranty.
Keep fridge at 3–5°C, freezer at –18°CRefrigeratorColder than needed wastes power; warmer spoils food faster.
Check the door sealRefrigeratorClose a paper strip in the door — if it slides out easily, the gasket is worn and leaking cold air.
Defrost on timeRefrigeratorThick ice on the freezer walls makes the compressor work harder. Defrost when ice passes ¼ inch.
Leave breathing spaceRefrigeratorKeep 4–6 inches behind and above the fridge so the condenser can release heat.
Use a stabiliserRefrigeratorVoltage swings are a top cause of compressor failure.
Act on warm spots or buzzingRefrigeratorA fridge that cools weakly or hums loudly needs a check before food spoils.
Don’t overload the drumWashing MachineOverloading strains the motor and bearings and leaves clothes unclean.
Use the right detergentWashing MachineFront-load machines need low-foam detergent; too much suds causes drain and sensor faults.
Clean the lint filter & drum monthlyWashing MachineRun a monthly drum-clean cycle to avoid odour and clogged drains.
Leave the door ajar after useWashing MachineLets the drum dry and prevents mould and smell.
Check inlet hosesWashing MachineReplace cracked or bulging hoses before they burst and flood.
Loud banging or leaks?Washing MachineStop the cycle and book a technician — it’s usually an unbalanced drum or worn seal.
Use a surge protectorTelevisionLightning and voltage spikes are the leading cause of TV power-board failures.
Keep vents clearTelevisionDon’t cover the back or sides — heat shortens panel and board life.
Clean the screen gentlyTelevisionUse a dry microfibre cloth; never spray liquid directly on the panel.
Avoid max brightnessTelevisionLower brightness extends backlight life and saves power.
Switch off at the socket in stormsTelevisionUnplug during thunderstorms or long absences.
Lines, patches or no sound?TelevisionDon’t press the panel — book an inspection early; panel damage is costly.
Use only microwave-safe dishesMicrowaveMetal or foil can spark and damage the magnetron.
Wipe spills right awayMicrowaveBurnt food residue absorbs energy and damages the cavity coating.
Keep the door seal cleanMicrowaveA dirty or bent door seal can leak radiation and cause arcing.
Never run it emptyMicrowaveRunning empty can burn out the magnetron.
Use a dedicated socketMicrowaveHigh-wattage ovens shouldn’t share an overloaded extension board.
Sparks or not heating?MicrowaveStop using it and book a technician immediately.
Change filters on scheduleWater PurifierSediment and carbon filters every 6–9 months, membrane as advised — late changes reduce flow and taste.
Flush the system after long breaksWater PurifierRun the water for a few minutes if the purifier was unused for days.
Sanitise the tank yearlyWater PurifierA yearly tank clean keeps bacteria and odour away.
Watch the TDS & flowWater PurifierFalling flow or higher TDS means filters or membrane need attention.
Keep it on a steady supplyWater PurifierFrequent power cuts stress the pump; use a stabiliser if voltage is poor.
Leaks or bad taste?Water PurifierShut the inlet and book a service — don’t keep drinking suspicious water.
Change filters on scheduleGeyser & Water HeaterSediment and carbon filters every 6–9 months, membrane as advised — late changes reduce flow and taste.
Flush the system after long breaksGeyser & Water HeaterRun the water for a few minutes if the purifier was unused for days.
Sanitise the tank yearlyGeyser & Water HeaterA yearly tank clean keeps bacteria and odour away.
Watch the TDS & flowGeyser & Water HeaterFalling flow or higher TDS means filters or membrane need attention.
Keep it on a steady supplyGeyser & Water HeaterFrequent power cuts stress the pump; use a stabiliser if voltage is poor.
Leaks or bad taste?Geyser & Water HeaterShut the inlet and book a service — don’t keep drinking suspicious water.
